Stalker Radar Stationary Statistics Sensor
The Stalker Radar Stationary Statistics Sensor uses no in road sensors to monitor and record traffic statistics including speed and vehicle classification.
With multiple communication ports this instrument can be used to collect traffic data whilst at the same time drive a speed awareness sign and provide real time monitoring of traffic flow conditions.
Stalker’s Stationary Statistics Sensor delivers high performance with low power requirements for pole mount or speed/message trailer application.
Suitable for mixed traffic applications.
Stalker Radar offer Traffic Analyst for interface to the Stationary Speed Sensors. Incorporating a sophisticated, user friendly analysis tools, it give the user the ability to:
– Analyse data.
– View data in real time.
– Configure the radar sensor up both in the office and field.
– View data in real time after setup.
– Tailor the radar sensor to the site.
– Load preconfigured settings.
Internal data memory for standalone operation
Collects traffic volume, speeds, direction, and classification over time
Tracks up to 10 moving vehicles simultaneously
Collects data in four modes:
Always on
Only during set time period
Same time period every day
Only on selected days
5 bin vehicle size classification with sensor training
MPH, km/h, knots, m/s, ft/s
Output Ports: RS-232, RS-485, USB
11 streaming, 3 polled protocols for speed awareness sign or real time analysis applications.
Multiple quality control filters for tailoring to different sites.
Internal realtime clock for data logging
Data viewing and analysis supported by the Stalker Traffic Analyst
Software upgradeable
General Specifications:
Size (LxWxD) w/o connector 11.2 cm x 9.9 cm x 4 cm
Weight 350 grams
Housing Die-cast aluminium
Lens HDPE
Electrical Connector M12, 12 pin
Mounting 4 x 10-32 UNF
Environmental Specifications:
Operating Temperature -30° C to +70° C
Storage Temperature -45° C to +85° C
Ingress rating IP67
Performance Specifications:
Maximum Range 400 metres
Minimum Speed 1.6 km/h
Maximum Speed 321.9 km/h
Speed Resolution 0.16 km/h
Speed Accuracy +/- 0.8 km/h +/-0.3%
Directionality Approaching, Receding, Both
Power Specifications:
Voltage 10 to 45 volts, DC
Current 80 mA @ 12 VDC typ.
Power < 1 watt
Protections Transient protection
Reverse voltage protection
Resettable Fuse
Microwave Specifications:
Centre Frequency 24.125 GHz
Frequency Span 100 MHz
Transmit Power 100 mW
Beam Width 30° by 32°
Communication Ports:
4 Communications types RS-485 full duplex
RS-485 half duplex
RS-232, no flow control
USB
Up to four simultaneous ports One RS-485 FD, one RS-232, and one USB port
Two RS-485 HD, one RS-232, and one USB port
Baud Rates 9.6K to 921.6K baud
Protocols 11 streaming protocols
3 polled protocols
Any output protocol on any port
Sensor are addressable with multi-drop capabilities
Ballinger Technology Pty Ltd
Unit 20/23 Heyington Avenue Thomastown Vic 3074
Phone 03 93868722