Four survey collection modes are available:

• Always on
• Only during set time period
• Same time period every day
• Only on selected days

Four data points are stored:

• Traffic volume
• Vehicle speeds
• Vehicle direction
• Vehicle classification

The Stalker Traffic Statistics Sensor allows data to be collected and easily downloaded to your PC for analysis and presentation using the Stalker Traffic Statistics App.

In addition to its statistical capabilities, the unit can track up to 10 moving vehicles simultaneously and operate as an ordinary speed sensor feeding strongest and fastest target information to external systems through a RS-232 or RS-485 interface.

Designed for use with the
Stalker Traffic Statistics App

Stalker Traffic Statstics App is a comprehensive, full-featured traffic statistics collection and analysis tool designed for law enforcement officers, traffic engineers, city maintenance departments, and other government safety personnel. The application controls radar sensor setup, survey data extraction, survey data analysis, and report creation, while working seamlessly with the Stalker Traffic Statistics Sensor.

Features of the Stalker Traffic Statistics Sensor

• Internal data memory for autonomous operation
• Collects vehicle counts & speeds over time
• Simultaneous multi-vehicle tracking capability for reliable data gathering
• Tracks up to 10 moving vehicles simultaneously
• Collects data in four modes:
• Always on
• Only during set time period
• Same time period every day

• Only on selected days
• Minimum following time data filter
• Streaming raw data output
• 5 bin vehicle size classification with proper sensor training
• Data viewing and analysis supported by Applied Concepts
  Stalker Traffic Statistics App
• Software upgradeable
• Internal realtime clock for data logging
• FCC Part 15 approved

PC Graphical Interface included

• Powerful tool for sensor configuration, testing and firmware update

Developers Kits

Stationary Speed Sensor II, sensor only
Part number: 200-0880-00

Stationary Speed Sensor II Developers Kit - RS-485
Part number: 200-0925-00
Includes sensor, power cable, serial data cable, sensor
mounting hardware, communications/programming application, and user manual.

Stationary Speed Sensor II Developers Kit - RS-232
Part number: 200-0925-01
Includes sensor, power cable, serial data cable, sensor
mounting hardware, communications/programming application, and user manual.

Environmental
Operating temp.	-30 to +70° C
Storage temp.	-45 to +85° C
Ingress rating	IP67

Physical Specifications:
Size (LxWxD) w/o connector	4.4 x 3.9 x 1.6 inches (11.2 x 9.9 x 4 cm)
Weight	<13 oz. (.35 kg)
Housing	Die-cast aluminum
Lens	HDPE
Electrical connector	M12, 12 pin
Mounting	4 x 10-32 UNF

Microwave
Center frequency	24.125 GHz
Frequency Span	100 MHz
Transmit Power	10 mW
Beam Width	30° by 32°
F.C.C. Approved. No license required.

Power:
Voltage	10 to 45 volts, DC
Current	80 mA @ 12 VDC typ.
Power	< 1 watt
Protections	Transient protection Reverse voltage protection Resettable Fuse

Trigger Output

Electrically isolated trigger contacts

Two normally open (NO) contacts

60 volt max

400 mA max

Communication Ports
4 Communications types	RS-485 full duplex RS-485 half duplex RS-232, no flow control RS-232 with hardware flow control
Up to Three simultaneous ports	One RS-485 FD and one RS-232 port available simultaneously Two RS-485 HD and one RS-232 port available simultaneously Any output protocol on any port
Baud Rates	9.6K to 115.2K baud
11 streaming protocols
3 polled protocols
Sensor are addressable with multi-drop capabilities

Performance
Max Range	>1300 Feet (400 m)
Min Speed	1 MPH (1.6 km/h)
Max Speed	200 MPH (321.9 km/h)
Speed Resolution	0.1 MPH (.16 km/h)
Speed Accuracy	+/- 0.5 mph +/-0.3% (+/- 0.8 km/h +/-0.3% )
Directionality	Approaching, receding, both