Ballinger Technology Pty Ltd  

Design, Distance, Speed, Vehicle Counting



Home Rangefinders Speed Detection Vehicle Counting Stalker Coptrax Pedestrian Counters Contact

Stalker Stationary Speed Sensor II

Built by Stalker Radar, founded in 1977, with expertise gained from successful speed measurement products in law enforcement, sports, and industry, the Speed Sensor II is compact and light weight. Its 11.2 x 9.9 x 4 cm size allows it to fit almost anywhere.

The Stalker Stationary Speed Sensor II utilizes digital signal processing that enables it to track vehicles either moving toward it, vehicles moving away, or both directions simultaneously.

Outdoor applications like speed boards and photo radar are protected by its IP67 waterproof case and a single, also waterproof, cable provides power and communications in 14 industry standard data formats. Additionally, it has a range of over 400 meters.

So if your application requires accurate, reliable speed measurement in environments from mild to harsh, a Developers Kit is available, which includes the Stalker Stationary Speed Sensor II, power cable, serial data cable, sensor mounting hardware, communications/programming application, and user manual.


Features of the Stalker Stationary Speed Sensor II


PC Graphical Interface included


Developers Kits

Stationary Speed Sensor II, sensor only
Part number: 200-0880-00

Stationary Speed Sensor II Developers Kit - RS-485
Part number: 200-0925-00
Includes sensor, power cable, serial data cable, sensor
mounting hardware, communications/programming application, and user manual.

Stationary Speed Sensor II Developers Kit - RS-232
Part number: 200-0925-01
Includes sensor, power cable, serial data cable, sensor
mounting hardware, communications/programming application, and user manual.


Stalker Stationary Speed Sensor II uses the latest in radar technology. Low cost, low power consumption and ease of use makes this speed sensor the right choice for nearly any speed measurement application.

Environmental

Operating temp.

-30 to +70° C


Storage temp.

-45 to +85° C


Ingress rating

IP67

Physical Specifications:

Size (LxWxD) w/o connector

4.4 x 3.9 x 1.6 inches (11.2 x 9.9 x 4 cm)


Weight

<13 oz. (.35 kg)


Housing

Die-cast aluminum

Lens

HDPE

Electrical connector

M12, 12 pin

Mounting

4 x 10-32 UNF

Microwave

Center frequency

24.125 GHz


Frequency Span

100 MHz


Transmit Power

10 mW

Beam Width

30° by 32°

F.C.C. Approved. No license required.

Power:

Voltage


10 to 45 volts, DC



Current

80 mA @ 12 VDC typ.


Power

< 1 watt


Protections

Transient protection

Reverse voltage protection

Resettable Fuse


Trigger Output

Electrically isolated trigger contacts


Two normally open (NO) contacts

60 volt max

400 mA max

Communication Ports

4 Communications types

RS-485 full duplex

RS-485 half duplex

RS-232, no flow control

RS-232 with hardware flow control

Up to Three simultaneous ports

One RS-485 FD and one RS-232 port available simultaneously

Two RS-485 HD and one RS-232 port available simultaneously

Any output protocol on any port

Baud Rates

9.6K to 115.2K baud

11 streaming protocols

3 polled protocols

Sensor are addressable with multi-drop capabilities


Performance

Max Range

>1300 Feet (400 m)

Min Speed

1 MPH (1.6 km/h)

Max Speed

200 MPH (321.9 km/h)

Speed Resolution

0.1 MPH (.16 km/h)

Speed Accuracy


+/- 0.5 mph +/-0.3% (+/- 0.8 km/h +/-0.3% )


Directionality

Approaching, receding, both